Aqua Perfecta Reverse Osmosis Filter + Di (100 GPD)

Product ID:

625

Price:£85.00

Quantity:

Need Booster Pump?

Compact 4 Stage Reverse Osmosis Systems with Di

Multi-stage superb compact filtration system. Aqua Perfect RODI reverse osmosis water filter uses reverse osmosis membrane with highest filtration precision At 0.0001 Micron, which effectively reduces more than 1000+ kinds of harmful contaminants (99.99%) from water oncluding Lead, Chlorine, Fluoride, Heavy Metals, Chloramine, VOCs, TDS, Limescale, Arsenic, Graphene Oxide, Endocrine Disruptors, Pharmaceuticals, PFAS Nitrates And Nitrites and many more.

To ensure your water is pure as possible this system has a four-stage filtration process. It is fully integrated with a sediment filter with sintered carbon block, 100 GPD reverse osmosis membrane and an inline post di resin filter. The design allows for fast and easy service. Three of the four stages are contained within a single easy-to-access housing. The fourth DI stage is an external inline filter to reduce to 0:00ppm

This system can fit neatly in to your undersink cupboard or in tight fit spaces. No plumbing skills are required as arrives with everything you need to install with full instructions.

Typical use of the 4 stage di : Marine Fish Keeping, Autoclaves, Car/Window Cleaning, Vodka Production, Hydroponics. (Di systems are not suitable for drinking water).

Benefits

Removing up to 99% of tap water contaminants including bacteria and viruses

Superior high capacity integrated sediment and carbon block Pre-filters

RODI systems benefit from a small post deionization process to filter mineral salts to guarantee 0ppm TDS

Ideal for collecting purified water for home use or aquarium systems

Features

Pre-assembled and supplied with all the fitting accessories

Includes a built in membrane flush system which reduces fouling to extend membrane life

Can be floor standing or wall mounted

Filter Stages

Stage 1 & 2 - Sediment Pre-Filter: For the removal of sediments, dirt, sand and rust.- Activated Carbon Block Pre-Filter: removes chlorine and organic chemicals that contribute to bad taste and odours.

Stage 3 - Membrane: Reverse Osmosis membranes are semi-permeable removing up to 99% of contaminants present in water including viruses, bacteria, heavy metals, fluoride, hormones, silica and salts.

Stage 4 - Small DI Resin Post Filter: reduces Total Dissolved Solids (TDS) to 0ppm and designed as a final polisher for the production of pure water

The effectiveness and productivity of RO systems increase with greater water pressure and temperature. The actual flow rate (in GPD) of any reverse osmosis system depends on your home water pressure and temperature.

All reverse osmosis systems are shipped fully assembled, it is simple enough to insert filters and connect to a water supply and waste water drain.

{Whats in the box}
The RO Systems includes

1 x Aqua Perfecta Ssystem Housing
1 x Dual stage sediment and carbon filter
1 x 100 GPD Reverse Osmosis Membrane
1 x DI Small Resin Stage (Resin included)
1 x RO and Filter Housing Spanners
3 x 1/4" tubing (various colours)
1 x Flow Restrictor
1 x Drain Saddle Valve
1 x Feed Water Clamp
1 x instruction manual

{Replacement Filters}

This System Replacement Filters

Pura 2-in1 Sediment and Carbon Block Replacement Filter

£29.95

100 GPD Reverse Osmosis Membrane

£34.80

1 Litre DI Resin

£10.20

{More Info}
Manufacturers recommend 43 psi is required at the membrane for full production, no need for electrical pumps for low inlet water pressure however water temperature may effect pure water production rates.

Filter Replacement

Pre-filters should be replaced every 12 months or 5000 gallons (or when visibly dirty) and membrane every 12-24 months. If any of your pre filters are exhausted, using the unit will put additional pressure on the membrane. Filters are much cheaper to replace than a damaged membrane, which are also available on the website. Di resin should be changed every 6 momths or when TDS starts to rise.

{Delivery Info}
We endeavor to process and despatch your orders as quickly as possible and orders placed before 1pm are normally despatched the same day to arrive next working day (Highlands and Islands deliveries normally take 1-2 days longer).

Your order will be delivered via a 3rd party courier or delivery service on a next working day delivery service. We recommend that you ensure you have received your order prior to booking any installers.

All orders come with full tracking details and you can keep an eye on your delivery by using the tracking button at the top of the website.