1. Home PageHome
  2. Contact UsContact Us
  3. My AccountMy Account
  4. View Cart
    View Cart
  5. View CheckoutCheckout

pH Meter for Wine (HI-981033)

pH Meter for Wine (HI-981033)
Product ID:
839
Price:£171.60





The HI-981033 has a specialised domed tip which allows for a wide area of contact with the measured sample. This permits a faster electrode response with a higher degree of stability.

HI-981033 pH Tester for Wine
Liquid Crystal display
On/off button
pH probe for wine with minimum and maximum immersion levels
Press the on/off button to turn the meter on. All tags will be displayed. The meter will go into measurement mode with current reading and calibrated buffers displayed.

The meter has a range of 0.0 to 12.00 pH and a resolution of 0.01pH with accuracy at ±0.05pH @ 25°C. Calibration is automatic at one or two-point.

The built-in probe is for the specific application listed.

With an easy to change battery facility, the HI-981033 has an approximate battery life of 1000 hours of continuous use and has an auto-off feature enabled after 8 minutes or 60 minutes.

Featuring a liquid crystal display, the meter weighs in at 46g and measures 51 x 157 x 21mm. For best results, operate in 0 to 50°C, RH 95% max environment.

The meter is shipped with a protective cap on the electrode containing storage solution.

Each meter is supplied with:

pH 3.00 buffer solution liquid sachet x 2
pH 7.01 buffer solution liquid sachet x 2
Cleaning solution for wine deposits
Cleaning solution for wine stains
Electrode storage solution, 13 mL dropper
Electrolyte fill solution
Pipette
Instruction manual
Quality certificate
Probe features
CPS™ Sleeve junction

Clogging prevention system (CPS™) technology improves pH measurements in samples with a high solids content. Conventional pH electrodes use ceramic junctions that can clog quickly when used in samples that have a high solids content such as wine must or juice. When the junction is clogged, the electrode does not function. CPS technology utilises the porousness of ground glass coupled with a PE sleeve to prevent clogging of the junction. The ground glass allows proper flow of the liquid, while the PE sleeve repels solids. As a result, pH electrodes with CPS technology take up to 20 times longer to be fouled as compared to conventional electrodes.

Low temperature glass formulation

The glass tip uses a special low temperature glass formulation. This is beneficial since many food products are at low temperature.

Spherical glass tip

The domed tip design allows for a wide area of contact with the measured sample. This permits a faster electrode response with a higher degree of stability.

Preparation:

The pH electrode is shipped with a protective cap containing storage solution. Before using the meter, remove the protective cap and condition the electrode by soaking the tip (bottom 3cm) in pH 7.01 buffer solution for several minutes. Then follow the calibration process.

Do not be alarmed if white crystals appear around the cap. This is normal with pH electrodes and they dissolve when rinsed with water.
Turn the meter on by pressing ON/OFF button.

Do not immerse the electrode over the maximum immersion level.

Stir gently and wait for a stable reading
For best results, periodically calibrate at the temperature of the wine
After use, rinse the electrode with water and store it with a few drops of storage solution in the protective cap
Re-attach the protective cap after each use.
Do not use distilled or deionised water for storage purposes.

{Technical}
Range 0.0 to 12.00 pH
Resolution 0.01 pH
Accuracy ±0.05 pH @ 25°C
Calibration Automatic, one or two-point
electrode Built-in probe for specific application
Battery Type CR2032 Li-ion
Battery Life Approximately 1000 hours of continuous use
Auto-off 8 minutes, 60 minutes or can be disabled
Environment 0 to 50°C, RH 95% max
Dimensions 51 x 157 x 21mm
Weight 46g

{Delivery Info}
We endeavor to process and despatch your orders as quickly as possible and orders placed before 1pm are normally despatched the same day to arrive next working day (Highlands and Islands deliveries normally take 1-2 days longer).

Your order will be delivered via a 3rd party courier or delivery service on a next working day delivery service. We recommend that you ensure you have received your order prior to booking any installers.

All orders come with full tracking details and you can keep an eye on your delivery by using the tracking button at the top of the website.

Recently Viewed